LSS-2404
1 |
P a g e
Introduction
Getting Started
This user manual describes the set up and basic operation of the LSS-2404 lighting controller, as well as the
corresponding configuration software. Before using it, please read the manual carefully to ensure proper use.
After reading the manual keep it in an easily accessible location for future reference.
Read Safety and Specifications and check that the LSS-2404 controller fulfills your requirements.
An LSS quick start set up guide is available on pg. 19 once wiring and mounting is completed. This manual is
specific to the computational imaging technique photometric stereo. If you need instructions for other
techniques contact CCS America, Inc.
This manual was published for firmware version FW1_10_11. When firmware updates are available release
notes will be included for further information.
Features
The LSS has ethernet capabilities and 4 channel outputs. Each output can control a segment of a 4-segment light
or an independent light.
Included Components
One LSS controller and one instruction card are included in the package. The Instruction Card contains a link to
download the latest software, manual and other resources for the LSS-2404. Make sure everything is in place
before proceeding.
Required Components
To correctly set up the LSS you will need the following items:
•
LSS Controller
•
LSS Web based software
o
The LSS software can be accessed by the link below
▪
http://bit.ly/LSSCI
o
Note: the LSS software only works with a Firefox browser (version 56 or above) or Microsoft
Edge
•
Compatible Lights (e.g. segmented ring light or bar light sets) and corresponding cables
•
Compatible Cameras and software
Optional Accessories
An assortment of extension cables, break out cables, and mounting brackets can be purchased to accommodate
various installation requirements and any CCS lights. More information is available on pg. 8.
