LSS-2404
7 |
P a g e
Mounting the LSS
The LSS is intended to be mounted to a standard DIN rail. Hook the top of the DIN rail mounting groove over the
rail, pull the spring loaded, red DIN rail lock to guide the bottom of the DIN rail mounting groove fully onto the
DIN rail, and release the lock. Press down the unit and lightly wiggle it to ensure that it is properly secured to the
DIN rail.
The illustration below shows the dimensions and key parts of an LSS controller
DIN Rail Lock
99
Status
Indicator
15
Power Input
118
35
Ethernet Jack
Trigger I/O
Lighting Output
Connector
