LSS-2404
50 |
P a g e
Diagnostics
/ch1= ... /ch12=
Sets channel output (0=off, 1=on).
/ch=
Sets all channel outputs (bitmapped hex format - D0=ch1 ... D11=ch12).
/triggerOut1= /triggerOut2=
Sets Trigger Output (0=off, 1=on).
/Vtrigger=
Sets Trigger Output voltage (5,12, or 24).
/triggerIn1 /triggerIn2
Returns Trigger Input ADC voltage reading in float format (scaled by 1/9.069 of voltage at Trigger Input
connector pin).
/RGBRed=
Set red color intensity of Status LED indicator 1-100%.
/RGBGreen=
Set green color intensity of Status LED indicator 1-100%.
/RGBBlue=
Set blue color intensity of Status LED indicator 1-100%.
/ethernetOff
Turns off Ethernet subsystem.
/FactoryReset
Returns state of Factory Reset button (1=pressed, 0=not pressed).
Factory
/password=
Returns TRUE only if password is correct ... otherwise returns HTTP error for security (not password=FAIL).
/mac
Returns MAC address (string format ... example 11-22-33-44-55-66).
/authorizationPassword=
Returns TRUE only if authorization password is correct ... otherwise returns HTTP error for security (not
authorizationPassword=FAIL).
/authorization
Returns authorization string.
/sncm=
Sets CM serial number (string format 64 characters max).
