Page
16
of
41
Place the tube seal over the end
of the tube and insert into the
machine as shown with the tube
flush up to the air inlet and the
seal in the groove. Do not allow
the tube to protrude into the air
inlet as this will restrict air flow
and performance.
Close the tube clamp by pressing
downwards; a plunger will hold it in
place. Insert the end of the fibre
into the tube and position it
through the slot in the buckle
shuttle, if applicable.
Open the drive wheels as shown
and place the fibre in the
grooves on the buckle plate and
infeed guide.
