Page
8
of
41
GENERAL PNEUMATIC SAFETY INSTRUCTIONS
The CBS Blown Fibre Blowing Machine is a pneumatic device, using
pressurised air to project fibre at high velocities. Please observe the following
precautions when operating the Blowing Machine:-
Compressed air can cause flying debris. This could cause personal injury.
Always wear personal protective equipment.
Ensure no personnel are in the manhole at the far end of the fibre run.
Severe personal injury may result.
Never open the machine when pressurised.
Only authorised, fully trained personnel should operate the air compressor.
GENERAL ELECTRICAL SAFETY INSTRUCTIONS
The machine has electronic and electrical power and control circuits. Electric
shock hazards exist that could result in severe personal injury. Observe the
following precautions to avoid electrical hazards:
Do not operate in water. Do not expose the machine to rain.
Do not remove cover of the mains power supply or the base from the
Accelair 2 machine. There are no user serviceable parts inside. Refer
servicing to qualified service personnel.
