Cavium FastLinQ 45000 Series, User Manual

Page: 275 / 342

14–Windows Server 2016
Configuring QoS for RoCE
248 BC0154501-00 P
Figure 14-8 shows command output.
Figure 14-8. Windows PowerShell Command: Get-NetAdapter
2. To enable RDMA on SET, issue the following Windows PowerShell
command:
PS C:\Users\Administrator> Enable-NetAdapterRdma "vEthernet
(SET)"
Assigning a vLAN ID on SET
To assign a vLAN ID on SET:
 To assign a vLAN ID on SET, issue the following Windows PowerShell
command:
PS C:\Users\Administrator> Set-VMNetworkAdapterVlan
-VMNetworkAdapterName "SET" -VlanId 5 -Access -ManagementOS
Running RDMA Traffic on SET
For information about running RDMA traffic on SET, go to:
https://technet.microsoft.com/en-us/library/mt403349.aspx
Configuring QoS for RoCE
The two methods of configuring quality of service (QoS) include:
 Configuring QoS by Disabling DCBX on the Adapter
 Configuring QoS by Enabling DCBX on the Adapter
NOTE
Note the following when adding a vLAN ID to a host virtual NIC:
 Make sure that the vLAN ID is not assigned to the physical Interface
when using a host virtual NIC for RoCE.
 If you are creating more than one host virtual NIC, a different vLAN can
be assigned to each host virtual NIC.