Castelle FAXPRESS PREMIER, Administrator'S Manual

Page: 151 / 639

Admin Guide > Line Settings
FaxPress Premier Administrator Guide 135
Use the Imprint Terminal ID field to have your company name or other identifier ap-
pear in the header at the top of each successful fax transmission. Enter up to 20 charac-
ters.
Note: When enabled and customized, the
Enable Customized Imprint
feature uses
the Remote Terminal ID and Imprint Terminal ID settings displayed here.
See Using the Imprint Header on page 303.
Use the Local Fax Phone Number field to enter the fax number of the line connected
to this line port.
Dialing Type
Select the radio button that describes the dialing type the phone line supports. Lines con-
figured for Pulse dialing support phones with rotary dials. Lines configured for Tone di-
aling support push button and newer dialing systems. Refer to your phone company
representative if for help determining the dialing type your phone lines support.
Use the PBX Pre-dial’s Local, Long Distance and International fields to enter the
prefix your PBX system requires for accessing an outside phone line. Up to five digits are
allowed. This is not required if the FaxPress is not connected to a PBX system. FaxPress
automatically inserts a 3 second pause after the PBX pre-dial. This means that you do
not have to insert a comma after the PBX digits.
Line Direction
„
Bi-Directional if you want the line to handle incoming and outgoing faxes.
„
Input Only if you want the line to handle incoming faxes only.
„
Output Only if you want the line to handle outgoing faxes only.
„
Not Connected if you don’t want the line to handle incoming or outgoing faxes.
Lines not connected must be configured as Not Connected.
If there is no phone line connected to the fax port and
Not Connected
is not selected, FaxPress will
send fax jobs through the fax port and cause failed job status for each attempted outgoing fax.
Note: The line direction parameter must be set for each line on the FaxPress
Premier server. If a line is not currently being used, set this parameter to Not
Connected.
Routing Type
Allows you to set the method the Premier will use to distribute faxes received on the cur-
rent line to user mailboxes.