Castelle FAXPRESS PREMIER, Administrator'S Manual

Page: 492 / 639

Admin Guide > HP9100C Scanner Connector
476
HP9100C Scanner Connector
Integrating the HP 9100C Digital Sender (Network Scanner) with the Castelle FaxPress
consists of two steps:
1. Enabling HP Scanner Support on the Castelle FaxPress.
2. Installing and configuring the HP 9100C Digital Sender and Digital Sender Service
so that they will submit faxed jobs to the Castelle FaxPress.
Enable HP Scanner support on the Castelle FaxPress
1. Launch the FaxPress client and log in to the FaxPress as Administrator or as a Fax-
Press user with Administrator rights.
2. Right-click on the FaxPress server listed under FaxPress Neighborhood and then
select the Properties button.
3. In the FaxPress Server Properties dialog box, select the Advanced Functions tab.
4. In the Enable support for section, check the box next to HP Network Scanner. You
will be prompted to reboot the FaxPress for the change to take effect.
5. After the FaxPress reboots, there should be a FaxPress user called HP_Scanner
and a new directory called HPFSCAN under the
\castelle\08xxxxxx\
directory
on the FaxPress file server.
This is the directory that you will point the HP Digital Sender service to during the
HP Digital Sender Service installation.
6. The FaxPress is now ready to support a HP 9100C Digital Sender.
Install and Configure the HP Digital Sender Service and HP 9100C Digital
Sender
Installing
Before installing the HP Digital Sender Service, make sure the HP Digital Sender Service
user name has:
„
administrator rights.
„
a password that never expires.
„
Log on as Service rights. By default the administrator user will not have Log on as
Service Rights. This will have to be granted to the user.
Install only on a Windows NT or 2000 computer. If an HP Network Scanjet 5 scanner is
on the network, the HP Digital Sender Service can be installed on the Windows NT server
the HP Network Scanjet 5 scanner service is on. This will manage both the HP Network
Scanjet 5 scanner and the HP Digital Sender.
Follow these steps to run the setup:
1. Run the master setup on the HP 9100C Digital Sender CD.
2. Click
Install the HP Digital Sender 9100C.
3. On the type of installation screen, click HP 9100C Administrator.