Castelle FAXPRESS PREMIER, Administrator'S Manual

Page: 489 / 639

Admin Guide > Fa EFI SendMe Integration
FaxPress Premier Administrator Guide 473
„
FaxPress server to use when faxing through SendMe (Click Find Servers to display
a list of all FaxPress servers on your network. If FaxPress server resides on a
different network segment, you can manually specify the IP address of the server.)
„
The user account to use when faxing. There are two modes supported:
„
All users send from a shared account and therefore do not need to login indi-
vidually in order to fax. In this case, check the Share this account for all
users and specify a user name and password. You can click Login to verify
the information and connectivity with the server.
„
Each user will need to login using their own credentials on FaxPress before be-
ing able to send a fax. In this case, uncheck the Share this account for all
users.
For troubleshooting, you may turn on tracing and specify the path where the trace file
should be generated and the maximum size of the file.
Sending a Fax
When the connector is installed, a Castelle Fax button is added to the SendMe main con-
trol panel.
The first step in sending the fax is to scan the document. The following screenshot shows
a scanned document (3 pages).