Castelle FAXPRESS PREMIER, Administrator'S Manual

Page: 120 / 639

Admin Guide > Configuring the FaxPress Premier
104
To configure the FaxPress Premier server properties required to send and receive faxes,
follow these steps:
1. Log onto a network workstation, preferably on the same segment as the FaxPress
Premier. The workstation should already have the FaxPress Plus Client installed.
2. Open FaxPress Plus. (
Start>Programs>FaxPress Plus>FaxPress Plus
) If
there are three or fewer FaxPress Premier servers on your network, the FaxPress
Plus interface will appear, with the FaxPress Plus Login window requiring you to
log in. If there are more than three FaxPress Premier servers on the network, or
if the FaxPress Premier is on a segment different from the one you’re on, a Fax-
Press Plus Accounts window will appear, requiring you to select and add the Fax-
Press Premier server you intend to configure.
Note: For more detailed information on logging into FaxPress Plus, see
FaxPress Plus Introduction on page 75.
3. If the FaxPress Plus Login window appears, enter the Administrator in the
User Name field, and leave the Password field blank, unless you’ve already set
a Administrator password. By default, the Administrator password field is blank.
You can also log into the FaxPress Premier from FaxPress Plus’s All Folders view,
by right-clicking on the serial number or name of the FaxPress Premier from the
FaxPress Neighborhood list, and selecting Login as.
Note: You must be logged in with Administrator privileges to configure
the FaxPress Premier. If you log in as a user without Administrator privileges,
the Server Properties will not be available.
4. If this is the first time you’ve opened FaxPress Plus, you’ll be prompted to activate
your Premier software. Select Obtain Key from Web to get your activation key,
then enter the key code and click Enable
.
5. Right-click on the FaxPress Premier server and select Properties
.