Castelle FAXPRESS PREMIER, Administrator'S Manual

Page: 161 / 639

Admin Guide > Setting the FaxPress Plus Server Properties
FaxPress Premier Administrator Guide 145
Setting the FaxPress Plus Server Properties
The FaxPress Plus Server Properties, a collection of the FaxPress Plus server’s configurable
fax parameters, are accessed through FaxPress Plus, the client-based administration and
fax transmission utility. FaxPress Plus is available on client workstations after the FaxPress
Plus client software is installed.
Note: If you have not yet configured the FaxPress Premier for basic operation,
see Configuring the FaxPress Premier on page 102.
The FaxPress Premier Server Properties include these settings:
Server Settings
*Line Settings
Storage Reclamation
*Dialing Properties
Advanced Functions
Castelle Internet Faxing
Load Sharing
*Email
*DID/PBX
Routing Type (Digital Premier)
Server Information
User Authentication (Novell only)
*Configuration required.
Two of the FaxPress Premier’s Server Properties, the Line Settings and the Dialing
Properties, require configuration immediately, before the FaxPress Premier can send
and receive faxes. The Email properties should also be configured. These settings enable
the Premier to send system alert notices to the administrator and send faxes to email as
well as fax recipients. They also allow users to access their email address books for fax
addressing, and for fax/email integration using the Email Gateway. The DID/PBX settings
must also be configured for integration with your PBX system and DID trunk.
To configure DID/PBX integration, see Automatic Routing and PBX Integration on page 89.
The rest of the Server Properties can be configured as needed after the FaxPress Premier
is operational.
Accessing the FaxPress Premier Server Properties
For more information on configuring the Premier, see Configuring the FaxPress Premier on
page 102.