Castelle FAXPRESS PREMIER, Administrator'S Manual

Page: 319 / 639

Admin Guide > Using the Imprint Header
FaxPress Premier Administrator Guide 303
Using the Imprint Header
Located at the top of each outgoing and the bottom of incoming fax pages, the Imprint
Header can either be used in its default capacity, or customized to include additional in-
formation.
In its default capacity, the Imprint Header is used to identify the date and time of the fax
transmission, as well as the Remote Terminal ID, CSID, recipient user name, and other
information.
The imprint header can also be customized and used to replace the fax cover page. Infor-
mation typically found on an outgoing fax cover page can be compressed into the header.
Incoming imprint header information can be used to assist in internal routing by displaying
recipient and timestamp information. Using the Imprint Header instead of a cover page is
especially cost-effective for fax broadcasts, or whenever you’re sending a large number of
faxes.
Default Imprint Header Fields
The information in the default Imprint Header includes:
„
Date
„
Time
„
RTI (Remote Terminal Identification)
This information is pulled from the FaxPress’ Line Settings. See Line Settings on page 134.