Casselin 3611630001342, Manual

Page: 21 / 99

EN
5.3 Problems and solutions
During normal operation of the fryer, certain problems may be encountered which
will find below the list as well as their causes and possible solutions.
Description Problems Solutions
Safety thermostat triggered
If during normal operation the
temperature rises and causes the
triggering of the safety thermostat which
interrupts the passage of gas to the pilot burner
Remove the protective cover "R" and
manually reset the
thermostat button.
If the anomaly persists, have the gas valve
checked by
a technician from the production house in
charge of maintenance
or by a qualified installer and, if necessary,
change the probe
temperature or valve
The pilot burner does not ignite
more
The ignition electrode is loose or incorrectly
connected.
Replace defective parts, change the gas
pressure setting, or clean the injector.
Piezoelectric ignition or cable are.
disconnected, the gas pressure is too low.
The nozzle is clogged
Always carry out the operation using
compressed air and NEVER
use wire or sharp objects that can change the
diameter
nozzles.