13
12
2.2 PLU Keypad
The PLU Keypad is used to enter alpha-numerical data. To use the keypad for programming
you must remove the pull-out sheet. To use the PLU Keypad in REG mode, you can write the
name and number of the PLU’s on the corresponding speed keys on the pull-out sheet. All
commodity names, message data, and store name and address are typed using these keys. The
scale automatically programs the PLU Keypad to be PLU 1 to 54. A speed key’s number is
shown circled on the lower left-hand side of each key.
KEY
Functions
This key displays the time and date in REG mode.
Used to go to PROGRAM mode and ACC mode.
This key works like a Caps Lock key on a computer. It is used to type capital letters. You can
tell if the SHIFT function is active by an indicator lamp in the UNIT PRICE display.
This is the Left Arrow Key. It is used to scroll the cursor to the left when programming alpha-
numeric data.
This is the Right Arrow Key. It is used to scroll the cursor to the right when programming
alpha-numeric data.
This is the Up Arrow Key. It is used to scroll from Line to Line when programming commodity
names, message data, or store name and address. It is also used to move up the System
Maps. In REG mode, it is used to go to AUTO mode.
This is the Down Arrow Key. It is used to scroll from Line to Line when programming
commodity names, message data, or store name and address. It is also used to move down
the System Maps.
This key is used to set the Zero Point to 0.00.
Used to clear Tare entries and to enter Tare weight.
These keys are used to enter numbers as “text” for a commodity name, message data, or
store name and address. The symbol keys are also used to type text.
These are the Letter Keys. They are used to type in text.
This is the Space Key. It functions the same as a space bar on a computer keyboard.
This key is the ENTER Key. It functions just like an Enter Key on a computer. It is used to go
to Line 2 or the next Line after typing some text.
PGM mode is used to set all of the scale's functions and PLUs.
REG mode is used for operating the scale.
ACC is used to generate sales reports.
In AUTO mode labels are issued when the weight is stabilized and greater than the weight that
you set in PROGRAM mode. The use of PRT/* key will also generate a label.
