CAS LP 1.6 Series, Owner'S Manual, Page: 16 / 34

31 30
How to program the head data
1) To go to PROGRAM mode press 10000 by using numeric keys and VOID key.
2) Press key three times, the display shows “HEAd”.
3) Press PRT/* key. The display shows “HEAd 01.01”. The numbers in the UNIT PRICE
display represent the line number and character number on which your cursor is at. The
number to the left of the decimal is the line number you are on(01 to 01). The number to
the right is the number of the character position on which you are(01 to 30).
4) Type in the NON-PLU commodity name using the Alpha-numeric keypad. If you make
any mistakes press C key. You may now begin typing your head data using your Alpha-
numeric keypad. After you type each line press ENTER key when you are done typing a
line. If you wish to skip a line press key. If you want to go up a line press key. Press
key or key to scroll left or right on a line of text. As you type you will see the text scroll
in the TOTAL PRICE display.
5) Press PRT/* key.
6) If you wish to finish PROGRAM mode press C key
4.6 Programming
The shop data are the 2 lines of text that get printed on the bottom of the label when it is not
suppressed by the label format. You can use these two lines to print the name and address of
the store or anything else you wish the scale to print at the bottom. Each line contains 30
characters of text.
How to program the shop data
1) To go to PROGRAM mode press 10000 by using numeric keys and VOID key.
2) Press key four times.
3) The WEIGHT display shows “SHoP”.
4) Press PRT/* key. The display shows “SHoP 01.01”. The numbers in the UNIT PRICE
display represent the line number and character number on which your cursor is at. The
number to the left of the decimal is the line number you are on(01 to 02). The number to
the right is the number of the character position on which you are(01 to 30).
5) Type in the shop name using the Alpha-numeric keypad. If you make any mistakes press C
key. You may now begin typing your shop data using your Alpha-numeric keypad. After
you type each line press ENTER key when you are done typing a line. If you wish to skip a
line press key. If you want to go up a line press key. Press key or key to scroll
left or right on a line of text. As you type you will see the text scroll in the TOTAL PRICE
display.
6) Press PRT/* key.
7) If you wish to finish PROGRAM mode press C key