11
10
Take the new roll of labels and find the ending. Peel-off and discard about 3 labels. Place the
label in the scale and thread the backing through the appropriate places.
Please view the checkpoints on the diagram. Feed the backing paper over the Paper Pressure
Shaft lifting the Pressure Plate in order to place backing between the two ( ); Feed the
backing paper between the two green Sensor Caps ( ); under the Label Guide Roller making
sure that the backing paper lies between the two washers on the Label Guide Roller ( ); feed
the backing over the red Rubber Roller and under the Print Head being careful not to touch
the underside of the Print Head ( ); over the Peel-off Bar (
); under the Return roller(
);
feed the backing under and around the Pick Up Spool(
).
Now Attach the Pick Up Spool Pin into the spool and turn it slowly counterclockwise in order
to tighten the backing paper.
Push the Print Head down in order to lock it back in place(
).
You will feel and hear it lock in place. Replace the printer covers. You have completed the
label roll installation. (See below fig.)
2. Keypad & Display
2.1 Numeric Keypad
The Numeric Keypad is used to enter all numerical data in PGM mode. In REG Mode, the
Numeric Keypad is used to enter prices, quantities, and counts. (See below fig.)
KEY
Function
Numeric Keys used to enter numerical data.
Clear Key used to clear error conditions and bring displays to their initial state.
Used to enter by piece sales, i.e. 3 Pieces FOR $1.00.
Price Look Up Key. This key is used to “call-up” PLU’s by their numbers.
The multiple label Key. This key is used to generate more than one label with the same data.
This is the print Key. It is used to manually print out a label in REG mode. It also works as an
“ENTER” key in PGM mode.
This is the FEED Key. It is used to feed a blank label through the printer mechanism.
Used to cancel account data.
Used to calculate change after adding several transactions.
Used to add several transactions
When ON, this function will not let the unit price or tare weight of a PLU automatically clear
even after you remove the item from the platter. The function acts like a toggle switch : you
will know the function is ON by the indicator lamp in the Unit Price display.
Notice : The PAY and + Keys may not be legal in some countries.