CAS CBW, Manual

Page: 58 / 83

59
mentioned above.
Stable time: S
Unstable time: D
When the delimiter is or , the special format is used instead of that
described above.
(2) For of or
ٱٱٱٱٱ OL ٱٱٱٱ <Delimiter>
- ٱٱٱٱ OL ٱٱٱٱ <Delimiter>
3.2.3 Using Command Codes
Note
: If communication conditions are incorrectly set, a communication error is
displayed.
(1) Commands that end with a number, character, or symbol other than [=]: Transmit to the balance
with a delimiter for each command code.
Example 1
: PRINT<CR> ... The same operation as pressing the key
(2) Commands that end with a [=]: Transmit the number to the balance with a delimiter.
Example 2
: TIME=1234 <CR> .. 12:34 is set as the current time.
Example 3
: P.TARE=1.23 <CR> (example of type of the second decimal place).
…1.23g is set as a Pretare value.
Example 4
: P.TARE=0.00 <CR> (example of the second decimal place)
…Clears (cancels) the Pretare value.
Note
: Number of digits, decimal point, position of decimal point of the numeral transmitted succeeding
to '=' are the same as the case of setting the numeric value using the AKB-301 Application Keyboard.
Number of digits below the decimal point is as follows.
S-type and H-type:
Use the same number of decimal places as in the gram-display.
This restriction does not apply to USER=, SOLID=, and LIQUID=.
Example 5:
MENU=4630 <CR> (4-digit number after [=])
This is the same in the following operation.
... from mass display, press the
key four times, the press the
key once and the press the key six times. This returns to the same display
as if the key was never pressed.
Press the key once, the key three times, and the
key once more.
This example indicates that is selected.
Note
: If there is 0 in the four-digit number, the setting is complete at that point and menu selection is
ended.
The result of this command varies depending on the type of the balance.