CAS CAU Series, Owner'S Manual

Page: 65 / 119

66
Anti-convection mode adjusts the timing of
appearance of the stability mark. Note that when
Anti-convection mode is selected, the stability
mark will take longer to appear. From the mass
display, press the
[CAL]
key repeatedly until
“ConvECt” is displayed. Pressing the
[O/T]
key
here sets it to Anti-convection mode. Setting of
this mode can be confirmed only in settings
check display (see 7.4.1).
11.2.3 High-stability Mode
The CAUW-D/CAUW/CAUX/CAUY series is
designed to minimize the effects of vibrations or
air currents. However, if it must be set up in a
location with poor conditions, use this function to
reduce the effects of vibration or air current even
further. The response will slow slightly but the
display will be stabilized. From the mass display,
press the
[CAL]
key repeatedly until “Hi-Stb” is
displayed. Press the
[O/T]
key here to enter High-
stability mode. Setting of this mode can be
confirmed only in settings check display
(see 7.4.1).
11.2.4 Pouring Mode (fast response)
When using the balance for dosing or filling a specified quantity, Pouring mode will give
sufficiently fast response. Note that the display will become very sensitive and unstable.
Pouring mode allows adjustments to the surrounding environment, too. You can specify
the environment of the installation site choosing from “normal environment”, “stable
environment”, and “unstable environment”.
Press the
[CAL]
key repeatedly from the mass
display until “Pouring” appears.
Pressing the
[O/T]
key here sets it to Pouring
mode and proceeds to “normL.Env” display.
the arrow mark indicates that the displayed
environmental setting is currently selected.
Press
[POWER]
key to return to the mass display.
(When anti-convection
mode is selected)
Settings Check Display
(When high-stability
mode is selected)
Settings Check Display
(when normal is selected)