CAS CAU Series Owner'S Manual Download | Manualshive

Page: 11 / 119

background image

12

1. Introduction

Thank you for choosing the CAS CAUW-D/CAUW/CAUX/CAUY Series analytical balance.
CAS confidently offers this high-performance analytical balance, the result of over 80 years
of experience in manufacturing precision balances. While providing rapid and accurate mass
measurement, reliability has been improved even more by employing the UniBloc cell,
introduced for use in electronic balances by CAS in 1989. These CAS analytical
balances provide WindowsDirect functions for transfer of measurement results to personal
computer without installing software. This and other various functions can be used to meet
the operator’s objectives. Also, the CAUW- D/CAUW/CAUX series offers consistently
accurate
measurement without calibration work, with temperature detection and time setting, and the
built-in motor-driven calibration weight that performs fully-automatic span calibration.

In order to make full use of the functions and performance provided in the CAUW-
D/CAUW/CAUX/CAUY series balance, please read this instruction manual before using the
balance and keep the manual for future reference.

This manual has notation for CAUW-D series, CAUW series, CAUX series, CAUY series,
combined as CAUWD/CAUW/CAUX/CAUY series (or notations two to three series).
Note that the menu settings and the calibration display examples shown in this manual are
mainly for the CAUW220 model. On different models, the numerical values and other items
may differ.
The model name can be found in the label placed in front of the weighing chamber.
The alphabets in model name indicate its series name. CAUW220D and CAUW120D are
called CAUW-D series.

Symbols Used in the Manual

1,2,3....

Shows operation procedure.

[POWER]

key, etc.

[ ]

shows operation keys.

“E-CAL” etc.

Shows items displayed on the balance, including displays
appearing during menu selection.

g display

The balance display is in gram unit so the value changes
depending on the load on the pan.

Mass display

The balance display is in one of mass units so the value
changes depending on the load on the pan.

Microsoft® and Windows® are registered trademarks of Microsoft Corporation.

Names of companies and products are trademarks or registered trademarks of the companies.

Copyright 2002 by

ⓒ

CAS CORPORATION, SEOUL KOREA

«
...
9
10
11
12
13
...
»

Summary of Contents for CAU Series
























































































































Reviews:

No comments

Related manuals for CAU Series

Brand: Zelmer Pages: 48

Brand: OHAUS Pages: 77

Brand: Digi Pages: 98

Brand: Fidelity Electronics Pages: 71

Brand: KERN Pages: 20

SR Scales SRV95 Series

Brand: SR Instruments Pages: 16

Brand: A&D Pages: 8

KERN MBA 10K-3M

Brand: PROMAT Pages: 33

Brand: Detecto Pages: 1

Brand: Detecto Pages: 2

Brand: Detecto Pages: 2

Brand: Detecto Pages: 2

Brand: Detecto Pages: 2

Brand: Detecto Pages: 12

Brand: Yunmai Pages: 9

Brand: ioLIVING Pages: 4

Brand: Salter Pages: 12

Brand: Salter Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands