![background image](http://html.mh-extra.com/html/carrier/pic-5/pic-5_installation-operation-and-maintenance-instructions_2562218058.webp)
58
SV01
— Condenser Solenoid Valve
SV02
— Compressor Solenoid Valve
SV03
— Pumpout Solenoid Valve
SV04
— Drain Solenoid Valve
SV05
— Regeneration Solenoid Valve
SV06
— Vent Solenoid Valve
TS01
— Purge Compressor Inlet Temperature
Fig 30
– Purge system wiring
3TR
— Transformer
4TR
— Transformer
7TB 1,2
— 24VAC Low Voltage Wiring Terminal Block
7TB LL1, LL2
— Main One Phase Power
7TB PE
— Ground
CC
— Purge Compressor/Fan Contactor
HC
— Purge Heater Contactor
HSR
— High Level Switch Relay
LSR
— Low Level Switch Relay
PR
— Purge Vacuum Pump Relay
SIOB
— Purge Input/Output Board
Fig 31
– Purge system control box
3.6.3 High pressure safety accessory: SRMCR
– Chiller equipped with VFD LF2
3.6.3.1 General description :
The unit is equipped with a safety loop, also called measurement, control and regulation devices playing a role in
safety (SRMCR for protection against overpressure that could be created by the compressor).
Made of :
-
2 active pressure switches (HPS) at compressor discharge
-
Safety relay K4 inside the control cabinet
-
Power contactor K101 inside the LF2 VFD
-
LF2 VFD
See chiller wiring diagram and bill of material (part numbers).
This SRMCR is designed in accordance with EN ISO 13849-1: 2016 according to the following characteristics:
- PL d
- Category 3.
Summary of Contents for PIC 5+
