![background image](http://html1.mh-extra.com/html/carrier/aquasnap-30wg-series/aquasnap-30wg-series_operation-instructions-manual_2562384016.webp)
16
General Parameters Menu – GENUNIT (continued)
No. Point name
Status
Unit
Displayed text*
Description
10
CHIL_S_S
dsable / enable
-
Net.: Cmd Start/Stop
Unit start/stop via Network: When the unit is in
Network mode, start/stop command can be forced
11
CHIL_OCC
no / yes
-
Net.: Cmd Occupied
Unit time schedule via Network: When the unit is in
Network mode, the forced value can be used instead
of the real occupancy state
12
CAP_T
0 to 100
%
Percent Total Capacity
Total unit capacity
13
CAPA_T
0 to 100
%
Circuit A Total Capacity
Total capacity, circuit A
14
CAPB_T
0 to 100
%
Circuit B Total Capacity
Total capacity, circuit B
15
DEM_LIM
0 to 100
%
Active Demand Limit Val
Active demand limit value: When the unit is in Network
mode, the minimum value will be used compared to
the status of the external limit switch contact and the
demand limit switch setpoint
16
SP
-
°C
Current Setpoint
Current setpoint
17
CTRL_PNT
-20.0 to 67.2
°C
Control Point
Control point: Water temperature that the unit must
produce
18
EMSTOP
dsable / enable
-
Emergency Stop
Emergency stop: Used to stop the unit regardless of
its active operating type
*Depends on the selected language (English by default).
Temperature Menu – TEMP
No. Point name
Status
Unit
Displayed text*
Description
1
EWT
-
°C
Entering Water Temp
Evaporator entering water temperature: Used for
capacity control
2
LWT
-
°C
Leaving Water Temp
Evaporator leaving water temperature: Used for
capacity control
3
SST_A
-
°C
Saturated Suction Tp A
Saturated suction temperature, circuit A
4
SST_B
-
°C
Saturated Suction Tp B
Saturated suction temperature, circuit B
5
SUCT_A
-
°C
Gas Suction Temp A
Compressor suction temperature, circuit A
6
SUCT_B
-
°C
Gas Suction Temp B
Compressor suction temperature, circuit B
7
OAT
-
°C
Outside Air Temperature
Outdoor air temperature: Used to determine a number
of control mechanisms
8
COND_EWT
-
°C
Cond Entering Water Temp
Condenser entering water temperature
9
COND_LWT
-
°C
Cond Leaving Water Temp
Condenser leaving water temperature
10
SCT_A
-
°C
Saturated Condens Tp A
Saturated condensing temperature, circuit A
11
SCT_B
-
°C
Saturated Condens Tp B
Saturated condensing temperature, circuit B
12
DGT_A
-
°C
Discharge Gas Temp cir A
Discharge gas temperature, circuit A
13
DGT_B
-
°C
Discharge Gas Temp cir B
Discharge gas temperature, circuit B
14
CHWSTEMP
-
°C
Chilled Water Syst Temp
Chilled water system temperature (used for master/
slave assembly control when cooling )
15
HTWSTEMP
-
°C
Heat Water Syst Temp
Hot water system temperature (used for master/slave
assembly control when heating)
16
DRY_LWT
-
°C
Dry Cooler Leaving WT
Dry cooler – leaving water temperature
17
SPACETMP
-
°C
Optional Space Temp
Outdoor air temperature reading
(optional OAT sensor needed)
*Depends on the selected language (English by default).
Pressure Menu – PRESSURE
No. Point name
Status
Unit
Displayed text*
Description
1
DP_A
-
kPa
Discharge Pressure A
Compressor discharge pressure, circuit A
2
SP_A
-
kPa
Suction Pressure A
Compressor suction pressure, circuit A
3
DP_B
-
kPa
Discharge Pressure B
Compressor discharge pressure, circuit B
4
SP_B
-
kPa
Suction Pressure B
Compressor suction pressure, circuit B
*Depends on the selected language (English by default).