13
5.5 - Display settings
The User Login screen allows the user to do the following:
• Select the language of the controller.
• Change the system of measurement (imperial or metric).
• Gain access to more control options.
To access the User Login screen, press the
Login
button
in the upper-right corner of the Synoptic screen.
1
Cursor indicating the selected language
2
Logged-in button
3
Logged-off button
4
Password dialog box
5
System of measurement: Metric/Imperial
User login
Only.logged-in.users.can.access.configurable.unit.parameters..
By default, user password is “11”.
The.user.password.can.be.modified.in.the.User.Configuration.
menu (USERCONF).
To log in as user
1. Press the
Login
button to open User Login Screen.
2. Press the Password box. A dialog box appears.
3. Provide the password (11) and press OK.
4. The User Login screen appears.
5. Press the
Logged-in
button to save your changes or the
Logged-off
button to exit the screen without making
modifications.
NOTE:
You may also leave the screen by pressing the Back
button. Your changes will be saved.
Security access settings
• User-level security ensures that only authorised users
are allowed to modify critical unit parameters.
• Only logged-in users are allowed to access the
Configuration.menu.
• It is strongly recommended to change the default
password of the user interface to exclude the possibility
of.changing.any.parameters.by.an.unqualified.person.
•
Only.people.qualified.to.manage.the.unit.should.be.
familiarized with the password.
5.6 - Main menu
The Main menu provides access to the main control parameters,
including general parameters, inputs and outputs status, etc.
In order to access the menu, press the
Main menu
button
located in the upper-left part of the Synoptic screen
(see also section 4.3).
Specific. unit. parameters. table/menu. can. be. accessed. by.
pressing the icon corresponding to the desired category.
In order to go back to the Synoptic screen, press
5.6.1 - General parameters screen
The General parameters screen provides access to a set of
general unit parameters.
To access the General parameters screen, go to the Main
menu and select
General Parameters
Press the
Up/Down
buttons
to navigate between
the screens.
5.6.2 -
Parameter modification
When. the. user. selects. the. parameter. to. be. modified,. the.
following screen is displayed.
Press
OK
to save or
EXIT
.to.cancel.the.modification.
1
2
3
4
5
