![background image](http://html.mh-extra.com/html/carrier/80hma-m00/80hma-m00_installation-operation-and-maintenance-instructions_2563379069.webp)
69
80HMA
81
Double address
Any
2 or more Slave Boards with
same address on the bus.
Reset & restart the full
addressing process.
B;D
82
Invalid address
Any
Board address is not within the
valid range
Restart addressing process.
B;D
83
Flow switch zone 1
Any
Q#&
Q@!
Æ
#&
B
84
Flow switch zone 2
Any
#&
Case 1:
- Water Pump Discrete Output
Q#&
Case 2:
- Water Pump Discrete Output
- Water pump Discrete Output
OFF
Æ
#&
85
Error on associated user interface
Any
Alarm is active on associated
User Interface
A
86
Lost communication on control input on
Slave Board
Slave
No communication within 24hr
on input set as 12 or 13
A
87
Pool temperature sensor error
Pool
Value out of range
A
User Interfaces - NUI 0, 1, 2, etc.
90
Loss of communication with selected
board
Any
Check wiring and/or
Addresses on Bus
A
91
Loss of communication with Master
board
Any
Check wiring and/or
Addresses on Bus
A
92
Invalid address
Any
Board address is not
within valid range. Refer to
addressing process to rebuilt
the network properly.
B
93
NUI not associated to board
Any
|+$
addressing and association of
user interface).
- If Par.128 of the User
Interface that is not associated
,,%!
must be repeated.
- Set Par.126 of the Board &
Zone to which the NUI has to
be associated with the value
read at Par.128 of the NUI.
B
94
Temperature error message
Any
Value out of range
A
95
Humidity error message
Any
Value out of range
A
96
EEprom error message
Any
Values in eeprom corrupted -
Call Carrier Service
B
97
Double address
Any
2 or more devices with same
address as the user interface.
Refer to the addressing
process to rebuilt the network
properly.
B
Alarm
code
Item
System type
Failure when
Type
Summary of Contents for 80HMA-M00
