Label creation
Vario II series
50
Operating manual
12.11
Press key
and the display indicates the following text mask:
Press key
E
to access the next field.
Selected values are only accepted if the entry was confirmed with key
.
Press key
and
to increase and/or decrease the number of mask
record (number of lines).
Y - Distance from top in mm
It is measured from upper label margin to lower left point of the
corresponding line.
H - Module width
Because of the fact that it is impossible to enter a symbole height for
RSS code you have to enter a value between 1 and 12 for module
width.
T - Type of code
54 = RSS
S - Human readable
0 = RSS has no human readable
X - Distance from right side in mm
It is measured from right label margin to upper left point of the
corresponding line.
V Segments per line / Symbol type
Because of the fact that it is impossible to enter a ration for RSS code,
you can enter for the first two digits the number of segments per line
(2 – 22)
*
and with the last digits you can enter an indication for symbol
type (1 – 12).
Indication for symbol type
1 - RSS
2 - RSS-14 Truncated
3 - RSS-14 Stacked
4 - RSS-14 Stacked Omnidirectional
5 - RSS Limited
6 - RSS Expanded Stacked
7 - UPC-A
8 - UPC-E
9 - EAN 13
10 - EAN 8
11 - UCC/GS1-128 with CC-A or CC-B
12 - UCC/GS1-128 with CC-C
P - Distance correction
Not used
D - Rotation of code
0 = 0 degrees, 1 = 90 degrees, 2 = 180 degrees, 3 = 270 degrees
(see also Rotation of text, code and graphic, on page 53).
*
only necessary for RSS Expanded
Mask entry
Composite bar code
