Vario II series
Label creation
12.11
Operating manual
47
Press key
and the display indicates the following text mask:
Press key
E
to access the next field.
Selected values are only accepted if the entry was confirmed with key
.
Press key
and
to increase and/or decrease the number of mask
record (number of lines).
Y - Distance from top in mm
It is measured from upper label margin to lower left point of
corresponding line.
H - Height of one line in symbol
Indication of height in mm of a line in bar code symbol.
T - Type of code
53 = CODABLOCK F
Z - Module size
Indication of corresponding factor.
X - Distance from right side in mm
It is measured from right label margin to upper left point of
corresponding line.
P - Number of characters/line
The first two figures specify the number of characters (2 up to max.
61) and the last two figures specify the number of lines (max. 22).
C - Mode
No setting possible.
R - Rotation of code
0 = 0 degrees, 1 = 90 degrees, 2 = 180 degrees, 3 = 270 degrees
(see also Rotation of text, code and graphic, on page 53).
Mask entry
CODABLOCK F
