Vario II series
Options
12.11
Operating manual
75
9
Options
9.1 Cutter
The menu item cutter is only displayed if the printer recognizes the
option via cutter photocell when switching on the printer.
Press key
to access the function menu.
In menu 'Print Mode', press key
as long as you arrive at the
'Cutter' menu.
Press key
to select the menu.
In the first line of the display the cutter mode can be selected.
In the second line the cutter offset which is approx. 20 mm can be set.
Press key
to change to the next operating mode.
Off:
The print order is processed without cutting.
Without backfeed:
A cut is effected after each label.
We recommend using this operating mode if no data which is to print
is in the upper part of the label.
With backfeed:
A cut is effected after each label.
Interval with final cut
A cut is effected after a fixed number of labels which you have to enter
at the print start and additionally at the end of the print order.
Interval without final cut:
A cut is effected after a fixed number of labels which you have to enter
at the print start. At the end of the printer order no cut is effected
except when the set interval comes to the end of the print order.
Final cut:
A cut is only effected at the end of the print order.
Single cut:
In case you are in the main menu or a print order has been stopped
you can release a single cut by pressing key .
The type of the single cut depends on the set cutter mode, offset and
the value set for the double cut.
Press key
res.
to return to the main menu.
Operating modes
