Vario II series
Options
12.11
Operating manual
81
9.5 Scanner
Press key
to access the function menu.
Press key
as long as you arrive at the 'Scanner' menu.
Press key
to select the menu.
Mode:
0
Off
1
Mode 1 (data comparison)
i.e. bar code date which was read by the scanner is compared with
the printed data.
2
Mode 2 (check readability)
i.e. it is only checked if the scanner can read the printed bar codes.
NoRd = Non readables:
Indication of number of successive non readables, i.e. when the
printer indicates an error message.
Value range: 0 - 9
1 = the printer stops at the first label which cannot be red from the
scanner and shows an error message.
0 = the printer do not stop at non-readable. A message appears at the
display only.
VEtik = Label feeding:
In many cases it is impossible to position the scanner directly at the
printhead, and therefore with this setting a feeding can be set
Value range: 1 - 5
The illustration below clarifies the meaning of this parameter.
Press key
to arrive at the next menu item.
Scanner type:
Selection of the connected scanner type.
For more information about the different scanner models, please
contact our sales department.
Press key
to arrive at the next menu item.
Scanner setup:
Positioning of scanner. First of all, the scanner must be connected,
the appropriate scanner must be selected in the scanner type menu,
the interface must be activated in the interface parameter menu and
the interface parameters must be set correctly.
Press key
to arrive at the next menu item.
Scan offset:
Indication of value at which the label is moved so the scanner can
read data onto the label.
