Vario II series
Label creation
12.11
Operating manual
35
7
Label creation
7.1 Bitmap fonts
Press key
and the display indicates the following text mask:
Press key
E
to access the next field.
Selected values are only accepted if the entry was confirmed with key
.
Press key
and
to increase and/or decrease the number of mask
record (number of lines).
Y - Distance from top in mm
It is measured from the upper label margin to the lower left point of the
corresponding line.
EY - Extension in direction Y
Extension of font in direction y (factor 1 - 9)
T - Selection of font type
01 - regular font
02 - regular font inverse
10 - rectangle
11 - line
S - Spaces between characters
min.: 1 x 0,083 mm - max.: 99 x 0,083 mm
X - Distance from right side in mm
It is measured from the right label margin to the lower left point of the
corresponding line.
EX - Extension in direction X
Extension of font in direction x (factor 1 - 9)
F - Selection of font
Bitmap
not proportional
Matrix (mm)
01 = FONT 01
0,8 x 1,1
127 characters
02 = FONT 02
1,2 x 1,7
255 characters
03 = FONT 03
1,8 x 2,6
255 characters
04 = FONT 04
4,0 x 5,6
127 characters
05 = FONT 05
1,8 x 3,2 descender
255 characters
07 = FONT 07
1,2 x 2,2 descender
255 characters
Mask entry
