Carel humiFog UA1K0HM00, User Manual

Page: 8 / 54

9 of 55
3. Models
3.1 Pumping Station part numbers
The available humiFog pumping units are coded according to the following structure;
Part code:
UA ppp X Y 0 x y
Where: ppp: rated flow
X: modulation control type
Y: Power supply
x: std or personalization
y: pump material
Pumping Stations
UA ppp X Y 0 x y
humiFog Pump capacity (kg/hr) Control type Volts/Phase Release Options Materials
1K0 = 2200 lbs/hr H = Stand Alone Modulating M = 460/3 0 = Std 0 = Brass
1K8 = 3960 lbs/hr Room On/Off x = Customized 1 = Stainless
2K5 = 5500 lbs/hr Duct Modulating - DDC
2 = Stainless
+ silicon free 3K5 = 7700 lbs/hr Duct Modulating - Stand-alone
5K0 = 11000 lbs/hr
4. Pumping Station positioning and mounting
4.1 Positioning
To minimize the connection length and the amount of pressure loss the
humiFog
should be placed close to the point where the water
will be distributed.
Certain clearances must be maintained around the unit for safety and maintenance (see Fig. 4.a
).
The cabinet can be placed wherever the following conditions are met.

Cabinet protection index: IP20 / Nema Type 1

Operating conditions: 20-80% RH non condensing, 34-104ºF (1-40ºC)

Storage conditions: 10-90% RH non condensing, 34-122ºF (1-50ºC)
IMPORTANT:
The maximum distance between the cabinet and the rack/distribution is 164 ft (50 meters).