background image

PRODUCT DATA

® U.S. Registered Trademark
Copyright © 2000 Honeywell    •   All Rights Reserved

HE365A,B Powered

Flow-Through Humidifier

APPLICATION

The Enviacaire Elite HE365A,B Powered Flow-through
Humidifiers use the warm air furnace blower to provide
humidification for the whole house.

FEATURES/BENEFITS

Antimicrobial coating on pad prevents the surface
growth and migration of bacteria, mold, fungus and
algae on the humidifier pad.

Bold new look with blue and white styling.

Capable of humidifying the largest area—up to 4200
sq ft (390 sq m)—of any Honeywell flow-through
humidifier.

Includes the PerfectFlo™ water distribution tray for
optimal efficiency and water usage.

Narrower footprint than popular compatible model
while maintaining a common humidifier pad and
comparable humidification performance.

Interior components designed for quick maintenance
and service.

HE365A Humidifier includes a convertible humidity
control that mounts on the wall or duct for more
flexibility.

HE365B Humidifier includes the Automatic Humidity
Control with Hu™ that automatically adjusts
humidity level and eliminates moisture build-up.

Continuous flushing reduces the frequency of
maintenance in a hard water installation.

AIRWATCH™ Indicator can be installed to remind
homeowner to change humidifier pad.

Five-year warranty.

whole-house air quality system

68-0243

Summary of Contents for Enviracaire Elite HE365A













Reviews: