10 of 55
4.2
Unit Dimensions and weights
4.3 Mounting
The pumping station frame includes four hole mounting locations, so that vibration dampening feet and/or bolts can be secured to the
floor and the frame. The floor surface should be level, or the unit should be leveled after mounted in position.
NOTE: It is recommended that the unit be fixed in position so that the piping or electrical connections do not become
damaged. The local, state, and country regulations must be followed for all mechanical and electrical installations.
UA1K0, UA1K8, & 2K5
UA3K5 & 5K0
Weight installed
960 lbs (436 kg)
1000 lbs (455 kg)
Weight packaged
1020 lbs (464 kg)
1060 lbs (482 kg)
A
24” (610 mm)
B
24” (610 mm)
C
32” (812 mm)
D
3” (76 mm)
E
47.4” (1204 mm)
F
33” (838mm)
G
66” (1677 mm)
Fig. 4.a
Summary of Contents for humiFog UA1K0HM00
