Carel humiFog UA1K0HM00, User Manual

Page: 35 / 54

36 of 55
11.5 Replacement parts list
11.5.1 Hydraulic and drive components
Item Label Description Part Number See Fig. No.
1 FILL VALVE INLET PRESSURE REGULATOR AND VALVE Contact Carel
11.a
2 LP GAUGE LOW PRESSURE GAUGE, 0-60 PSI Contact Carel
3 FILTER INLET WATER FILTER HOUSING 1309992AXX
4 -- INLET WATER FILTER 1309991AXX
5 LP LOW PRESSURE SWITCH, 1 BAR 1309654AXX
6 CS CONDUCTIVITY METER 0-5000µs/CM 13C153A005
7 LP GAUGE LOW PRESSURE GAUGE, 0-60 PSI 1309901AXX
8 PT PRESSURE TRANSDUCER 1309510AXX
9 HP GAUGE HIGH PRESSURE GAUGE Contact Carel
10 HP HIGH PRESSURE SWITCH 1309517AXX
11 ACCUMULATOR PULSATION DAMPENER (PRE-CHARGED AT 550 PSI) 1309993AXX
12 REGULATOR PRESSURE REGULATOR (SET AT 1100 PSI) 1313849AXX
13 NTC NTC WATER TEMPERATURE SENSOR NTC030WH01
14 TV THERMO DRAIN VALVE 1312112AXX
15 -- TRIPLEX PLUNGER PUMP
1
CONTACT CAREL
16 -- SAFETY RELIEF VALVE (PRE-SET AT 1450 PSI) 1309510AXX
17 -- POLY-V DRIVE BELT
1,2
CONTACT CAREL
18 -- TEFC PREMIUM EFFICIENT MOTOR
1
CONTACT CAREL
19 -- TEMPERATURE SWITCH
CONTACT CAREL
1
See 11.5.7 table for pump part numbers or contact CAREL for additional information.
2
When servicing the belt, be certain that

The pulleys are aligned to within 2
o
and no greater than 1/8” offset

The belt tension is 80-100 lbs for the 6 Poly-V belt, using a Krikit I belt tensioning tool or other equivalent method.

The belt tension is 200-220 lbs for the 12 Poly-V belt, using a Krikit II belt tensioning tool or other equivalent method.
Tab 11.d