Carel Heos, User Manual

Page: 7 / 60

7
ENG
Heos +0300078EN - rel. 1.6 - 23.11.2017
1. INTRODUCTION
1.1 Main features
Heos is a control system for the complete management of showcases or
cold rooms in which the compressor (variable speed or on/off ) is cooled
by a water loop.
The control board is ready for DIN rail assembly, is fi tted with plug-in
screw terminals and comes with a built-in electronic expansion valve
driver.
In order to manage multiplexed showcases, Heos can manage a local
Master-Slave network comprising a maximum of 6 units (1 Master and 5
Slave). Each controller can be fi tted with its own display (PLD) and/or user
terminal (pGDe), for service or commissioning.
Main features:
•
board with built-in driver for CAREL single-pole valve;
•
modulating management of cooling capacity by inverter on BLDC
compressor;
•
stand-alone or multi-evaporator management;
•
automatic balancing of cooling capacity in multi-evaporator
confi guration;
•
COP calculation and management;
•
advanced superheat control with protection against low superheat
(LowSH), low evaporation temperature (LOP), high evaporation
temperature (MOP) and low suction temperature (LSA);
•
defrosts can be activated from the keypad, digital input, via network
from the Master, or supervisor;
•
various types of defrost available: electric heater, reverse cycle, hot gas;
•
smart defrost functions;
•
coordination of network defrosts;
•
management of lights and curtains;
•
anti-sweat heater modulation;
•
evaporator fan speed modulation;
•
possibility to display and set Slave parameters from the Master;
•
sharing of one or more network probes (e.g. network pressure probe);
•
HACCP alarm management;
•
RS485 serial for BMS inside.
1.2 Components and accessories
Part number Description
UP2AH010302SK Heos high effi ciency showcase controller - 230 Vac power supply
UP2BH010302SK Heos high effi ciency showcase controller - 24V power supply
UP2AH030302SK Heos for cabinets with cover - 230 Vac power supply
UP2BH030302SK Heos for cabinets with cover - 24 V power supply
PGDEH00FZ0
pGDE Heos display, for panel mounting, with buzzer
PLDH0GFP00 pLDpro Heos display, for panel mounting, with buzzer
S90CONN000 Connector for pGD evolution display, 1.5 m long
S90CONN001 Connector for pGD evolution display, 3 m long
PLDH0SF400 PLD small Heos, green display
PLDCON03B0 3 m cable for PLD display
PLDCON05B0 5 m cable for PLD display
PSD10102BA POWER+ 10 A, 200-240 Vac 1PH, IP00 with COLDPLATE
PSD10162A0 POWER+ 16 A, 200-240 Vac 1PH, IP20/IP44 with COLDPLATE
PSD101021A POWER+ 10 A, 200-240 Vac 1PH, IP00
PSD1016200 POWER+ 16 A, 200-240 Vac 1PH, IP20/IP44
PSD1018400 POWER+ 18 A, 380-480 Vac 3PH, IP20/IP44
PSD1024400 POWER+ 24 A, 380-480 Vac 3PH, IP20/IP44
PSD10184A0 POWER+ 18 A, 380-480 Vac 3PH, IP20/IP44 with COLDPLATE
PSD10244A0 POWER+ 24 A, 380-480 Vac 3PH, IP20/IP44 with COLDPLATE
PSACH10100 Coils for POWER+ 18 A
PSACH10200 Coils for POWER+ 24 A
E2V**FSFC0 Exp valve - E2V* 12-12 ODF
E2VSTA0320 E2V unipolar stator with 2m cable
NTC030HP00 NTC temp. probe, HP IP67, -50T50, 3 m long
NTC030HF01 NTC temp. probe, HF IP67, -50T90, strap-on, lung. 3m. 10 pz
NTC030HT41 NTC temp. probe,, HT IP55, 0T150, lungh. 3 m, 10 pz
SPKT0043P0 Pressure probe, 0-5V 0...17,3 barg (0...250 psig)
SPKT00B6P0 Pressure probe, 0-5V 0...45 barg (0…650 psig)
SPKC002310 3-wire cable, 2 m long, for SPKT pressure probes, IP67 Packard
connector
Tab. 1.a
Example of stand-alone system
BMS
Supervisor network
Master/Slave network
M
S1 .... S5
Fig. 1.a
Example of multi-evaporator system
BMS
Fig. 1.b