CareFusion Pyxis MedStation 4000, User Manual, Page: 45 / 246

Devices
Pyxis MedStation 4000 System Console User Guide 35
Editing a station or other device
This section describes how to update units by using the Editing Device dialog
box. The contents of this dialog box can vary based on the type of device you are
updating. For information about updating devices globally, see
Updating device
information globally on page 144 .
1. Select
System Setup > Devices
.
2. In the Devices dialog box, select the applicable device and click
Edit
.
The Editing Device dialog box for the selected device appears with the
Settings tab selected.
3. Update the applicable information on each tab.
For information on the tabs and their options, use the information provided in
Adding a station or other device on page 19 .
4. Click
Save
.
5. In the confirmation dialog box that appears, click
OK
to continue.
6. To return to the standby dialog box, click
Close
.
Deleting a station or other device
The following procedure explains how to delete a station or other device from the
system.
1. Make sure that you run all applicable reports for the device that you intend to
delete.
2. Select
System Setup > Devices
.
3. In the Devices dialog box, select the device name and click
Delete
.
4. In the confirmation dialog box that appears, type
yes
in the box and click
OK
to continue.
5. After the confirmation message appears, click
OK
.
6. In the Devices dialog box, click
Close
.
CAUTION
Use caution when deleting a device. You will lose all configuration information for
that device when it is deleted. This information cannot be recovered.