CareFusion Pyxis MedStation 4000 User Manual Download Page 37

Page: 37 / 246

Devices

Pyxis MedStation 4000 System Console User Guide

•

Show Patient Summary

—Select to display an overview of patient

information when using the Patients option at the station.

•

Charting On Remove

—Select to chart when medications are removed.

Removal time is the administration time.

•

Meds Due Reminder

—Select to be reminded when medications are due.

7. Complete the steps outlined in the next section,

Entering the hardware

settings

Entering the hardware settings

This section describes how to complete the Hardware tab.

1. Click the

Hardware

tab.

2. Click

Add

3. In the Add new Drawer for device dialog box, enter the applicable

information.

•

Drawer #

—Enter the drawer number.

Summary of Contents for Pyxis MedStation 4000























































































































































































































































Search results

Summary of Contents for Pyxis MedStation 4000

Reviews:

CareFusion Pyxis MedStation 4000, User Manual, Page: 37 / 246

Search results

Summary of Contents for Pyxis MedStation 4000

Reviews: