CareFusion Pyxis MedStation 4000, User Manual, Page: 189 / 246

Batch reports
Pyxis MedStation 4000 System Console User Guide 179
3. Select the applicable options and use the Select buttons to configure each
qualifier.
4. When you are finished updating the customized report options, click
Batch
Times
.
5. In the Batch Time Setup dialog box, update the time and days on which the
report should run.
6. If applicable, select a different console or printer where the report is to print.
7. In the
Comment
box, update the information and click
OK
.
8. In the report dialog box, click
Save
.
The Batch Reports dialog box lists the report that you have set up.
9. To return to the standby dialog box, click
Close
.
Deleting a batch report
The following procedure explains how to delete batch reports.
1. In the menu bar, select
Reports > Batch Reports
.
2. In the Batch Reports dialog box, select the applicable report and click
Delete
.
3. In the confirmation message, click
YES
.
4. To return to the standby dialog box, click
Close
.
Enabling or disabling a batch report
You can temporarily disable a batch report if you do not use it often. Disabling a
batch report rather than deleting it is sometimes preferred if the qualifiers it
contains are very specific or complex and would take a substantial time to
redefine.
1. In the menu bar, select
Reports > Batch Reports
.
2. In the Batch Reports dialog box, select the applicable report job and click
Change Status
.
This button works as a toggle. It changes the Status from ENABLED to
DISABLED and back again.
3. To return to the standby dialog box, click
Close
.
Printing a batch report
The following procedure explains how to print a batch report.
1. In the menu bar, select
Reports > Batch Reports
.
2. In the Batch Reports dialog box, select the applicable report and click
Print
Now
.
3. In the confirmation message, click
OK
.
4. To return to the standby dialog box, click
Close
.