CareFusion Infant Flow SiPAP, Operator'S Manual

Page: 3 / 80

Infant Flow SiPAP
iii
675–101–101 Rev. P
Revision History
Date Revision Changes
September 2003 675-101(3) Release
August 2004
D Release manual in VIASYS Respiratory Care template using
VIASYS Respiratory Care nomenclature. Revise part number
list in Appendix B approved accessories.
November 2004 E
Revised contact/ordering information.
Ch 4. Sec. 5.b revised transducer LED illumination conditions.
Appendix A corrected units from "Pm" to bpm.
Appendix E added dimension ranges to bonnet sizes.
Appendix E Was 467350 Transducer Assembly Is: 677-002
Transducer Interface.
March 2005 F Updated the contact information.
Updated the Declaration of Conformity Notice.
May 2006 G Updated the company name.
Updated the Contact and Ordering Information.
Update the figures.
Added a Caution regarding back pressure. Added a Note
regarding the Hudson RCI Humidification System.
Added the sentence “
Ensure there is a minimum 8 LPM set
on the NCPAP/PRES Low Flow meter”
to the first paragraph
under “Two Point O
2
Sensor Calibration.
Changed step 8 regarding the nCPAP pressure.
Changed the second and third paragraphs under Changing a
Control.
Added “Setting a Manual Breath.”
Added a note regarding the enabling of manual breath or back-
up apnea breath.
Added a warning concerning infant flow consumables.
Added the statement “Disconnect the air and oxygen gas
sources when the Infant Flow SiPAP is not in use.”
Removed Appendix E.
February 2009 H Changed Ti to T-High and Inspiratory Time to Time High.
Replaced reference to VIASYS Respiratory Care accessories
with reference to Cardinal Health accessories.
Added “TM” superscript to “SiPAP”.
Added reference to AirLife
TM
Infant nCPAP System Generator.
Removed “inspiratory time” or “inspiration time”.
Replaced “Inspiratory Time (Time High)” with “Time High