CareFusion Infant Flow SiPAP, Operator'S Manual

Page: 4 / 80

iv
Infant Flow SiPAP
675–101–101 Rev. P
Date Revision Changes
(Thigh)”
Changed 1 cmH
2
O to 1.5 cmH
2
O; Added “or 60 psi” to clarify 4
bar.
Added the parts list for both Infant Flow Products and AirLife
TM
Products.
Added reference to Cardinal Health contact information on page
v.
Added reference to AirLife™ Infant nCPAP System accessories.
Added a warning about using an external oxygen monitor.
Added reference to factory trained technician and Service
Manual P/N 675-120.
Added “
®
” (registered symbol) superscript to Infant Flow.
Updated CAUTION label: from “Back pressure from the
humidifier chamber to some auto-feed water bags may occur.”
To “Back pressure from some auto-feed humidifier chambers
may cause the water bags to fill with air.”
Replaced Figure 5.
Add content concerning a depleted or damaged internal oxygen
cell.
Added a warning about using an external oxygen monitor.
Added content to explain fault code E5X.
Replaced “key” with “button”; clarified oxygen alarm by adding
“the audible”; added clarification of the internal monitoring being
disabled and that an external oxygen monitor must be used.
Added a Note regarding the 2
nd
Flow Meter being used for
manual breath delivery;
Added hyphen in “T-High”.
Clarified the “Mode Select Screen”
Added “Directions for using the AirLife™ Infant nCPAP System.
Changed 1 cmH
2
O to 1.5 cmH
2
O; Corrected low battery voltage
level from 10 to 11.10.
Added “or trained biomedical engineer”.
Added a table entry for the oxygen monitor and alarms disable.
Changed 1 cmH
2
O to 1.5 cmH
2
O; corrected low battery voltage
level from 10 to 11.10.
Updated Table 10.
Updated Table 11.
Clarified the meaning of T-High.
February 2010 J Revised to comply with the revised Medical Device Directive
2007/42/EC.