Cardinal Health Alaris 8300 Series, Technical & Service Manual

Page: 33 / 68

5.2.1 Latch Assembly and Feet
1. Remove two (
2
) screws attaching Latch
Assembly to bottom of Rear Case and
remove Latch Assembly components.
2. Pull two (2) Feet from underside of
module.
NOTE: Pay close attention to Compression
Spring location and orientation to ensure
proper installation during reassembly.
During Reassembly:
When reinstalling the Latch Assembly, press
toward outer edge of the module and screw
into position.
Apply a thin layer of Dow Corning
Molykote
33
(or equivalent) silicone grease
to Feet.
NOTE: The Feet press-fit into the module.
5-3
Alaris ® EtCO
2
Module (8300 Series)
Technical Service Manual
CORRECTIVE MAINTENANCE
Feet
Rear Case
Latch Assembly
components
5.2 DISASSEMBLY/REASSEMBLY (Continued)
Compression Spring