Cardinal Health Alaris 8300 Series, Technical & Service Manual

Page: 42 / 68

5-12
Alaris ® EtCO
2
Module (8300 Series)
Technical Service Manual
CORRECTIVE MAINTENANCE
5.2.10 Display Board
1. Remove screw attaching ground wire to
Display Board.
2. Cut cable tie, then disconnect Keypad
Harness and Backlight harnesses from
Display Board.
3. Remove three (3) screws attaching
Display Board to Front Case.
4. Remove Display Board from Front Case
During Reassembly:
• When reinstalling Display Board, slide
LEDs under Status Indicator Lens.
• Reinstall screws attaching Display Board
to Front Case.
• Reinstall Keypad and Backlight Harness,
then replace the cable tie.
• Reinstall the keypad ground wire.
5.2 DISASSEMBLY/REASSEMBLY (Continued)
Display
Board
Front Case
Status
Indicator
Lens
Keypad
Ground
Wire
Keypad
Harness