Cardinal Health Alaris 8300 Series, Technical & Service Manual, Page: 38 / 68

5-8
Alaris ® EtCO
2
Module (8300 Series)
Technical Service Manual
CORRECTIVE MAINTENANCE
5.2.6 Power Board/Oridion Module
1. Use small diagonal cutters to remove
upper (if installed) and lower snap
rivet(s) attaching Power Board to Frame
Assembly. If installed, remove IUI
Bracket Strap.
2. Remove screw holding PCB retainer to
Frame Assembly.
3. Remove Power Board from Frame
Assembly.
4. Disconnect electrical harness between
Power Board and Oridion Module.
5. Separate Power Board and Oridion
Module:
•
Remove three (3) screws from
underside of Power Board.
• Remove screw and nut attaching
PCB retainer to Power Board.
During Reassembly:
• Ensure that Oridion Module and PCB
retainer are positioned correctly over the
Power Board before reinstalling.
• Reinstall the IUI Bracket Strap and snap
rivets to secure the Power Board to the
Frame Assembly.
5.2 DISASSEMBLY/REASSEMBLY (Continued)
PCB retainer
Power
Board
Oridion
Module
When using cutters to remove snap
rivet, take care not to cut the rivet.
CAUTION