Cardinal Health Alaris 8300 Series, Technical & Service Manual

Page: 14 / 68

2.3 CONFIGURATION OPTIONS AND
DEFAULTS
NOTES:
• Changes to the factory default values are
retained after a power cycle.
• If Factory Default is Yes , then all the
configuration settings are set to their
factory default.
• If Factory Default is No , then one or
more of the configuration settings has
been changed. If desired,
Factory
Default can be selected and set to Yes ,
which will set all configuration settings to
their factory default.
• With the Profiles feature enabled, the
settings are configured independently for
each profile. A hospital-defined, best-
practice data set must be uploaded to
enable the Profiles feature. Date and
Time is a system setting and is the same
in all profiles.
System Settings: Refer to the PC Unit
section of the Alaris
®
System
DFU
for
information on system settings (including
alarm audio profile, battery meter
enable/disable, clock setup, key click audio
enable, tamper resist enable/disable).
EtCO
2
Module Settings: Refer to the
product-specific (EtCO
2
Module) section of
the Alaris ® System
DFU
for information on
EtCO
2
Module settings (including limit
mode, high and low respiratory rate alarm
limit, high and low EtCO
2
alarm limit, no
breath alarm setting, and high FiCO
2
alarm
limit).
NOTES:
• Pressing the
EXIT
soft key while in a
System Config - Module screen
immediately powers the system down, with
no “Powering Down” display.
• Pressing the
EXIT
soft key while in a
System Config - EtCO
2
screen returns the
display to the main System Config -
Module screen.
• Pressing the
CONFIRM
soft key while in a
System Configuration option screen:
♦
accepts existing setting or setting
change
♦
displays next option setting screen (if
applicable) or returns display to
System
Config - EtCO
2
screen
• Pressing the Point-of-Care Unit’s
CANCEL
key while in a System Configuration option
screen:
♦
leaves setting unchanged
♦
returns display to System Config -
EtCO
2
screen
CHECKOUT AND CONFIGURATION
2-2
Alaris ® EtCO
2
Module (8300 Series)
Technical Service Manual