Cardinal Health Alaris 8300 Series, Technical & Service Manual

Page: 15 / 68

To access System Configuration options:
NOTE: Refer to EtCO
2
Module DFU for
alarm settings. If profiles are enabled, those
settings are set by the profile.
1. Hold
OPTIONS
key at power up.
2. Press
PAGE DOWN
soft key.
3. Press EtCO
2
Module soft key.
2.4.1 Alarm Limits
NOTE: The following examples show adult
alarm limits for illustration. Follow the same
steps for neonatal alarm limits.
1. From the System Config - EtCO
2
display, press the Adult alarm limits or
Neonatal alarm limits soft key.
2. To change an alarm limit, press the soft
key next to that parameter. The selected
parameter is highlighted.
CHECKOUT AND CONFIGURATION
2-3
Alaris ® EtCO
2
Module (8300 Series)
Technical Service Manual
2.4 CONFIGURATION SETUP