![background image](http://html1.mh-extra.com/html/cardin/s504-series/s504-series_manual_2556004021.webp)
21
MEMORIZZAZIONE CODICE TX-TX
TRQ504
29-10-2013
DM0910
Description :
Product Code :
Date :
Drawing number :
P.J.Heath
CARDIN ELETTRONICA S.p.A
- 31020 San Vendemiano (TV) Italy - via Raffaello, 36 Tel: 0438/401818 Fax: 0438/401831
Draft :
All rights reserved. Unauthorised copying or use of the information contained in this document is punishable by law
MR
A
MR
B
1
2
3
3. Deleting a channel code
- Move the transmitter near to the interface.
- Press and hold down the
P2
button on the interface, the Led
L1
will flash quickly and the buzzer will beep twice.
- Press the button (channel) you wish to cancel on the transmitter.
- The Led
L1
on the interface will glow continuously and the buzzer will beep twice. After a few moments led
L1
will switch off.
- Release the
P2
button. End of operation.
Note: if no codes are present in memory the interface will beep ten times.
4. Memorizing more transmitters by using a previously memorised transmitter
This procedure allows you to enable a new transmitter (from a remote position) with the help of a transmitter that has already been memorised in the system. As the
presence of the interface is not required this procedure can be carried out in any remote location (for example in your chosen sales outlet).
Access to the "rapid memorizing" procedure can be enabled or disabled on the receiver by inserting (or removing) the jumper J1:
• Jumper
J1
when inserted the rapid memorization procedure is enabled.
• Jumper
J1
when not inserted the rapid memorization procedure is disabled
- Remove the upper cover from the transmitter to be memorised and from the transmitter that has
already been memorised as shown in the drawing below (det. a).
- Place the transmitter
A
, that has already been memorised in the interface, beside the new transmitter
B
(det. b).
- Using a pointed object press and release the
MR
button on both transmitter (in sequence or
simultaneously).
- The orange LEDS on the transmitters will flash slowly.
- Press and release a channel button on transmitter
A
that is already present in the interface (det. c).
- The led of the new unit
B
will remain lit for 3 seconds to confirm memorization (det. d).
Transmitter
B
will now command the interface exactly like transmitter
A
.
MEMORIZZAZIONE CODICE TX-TX
TXQ504C4
29-10-2013
DM0911
Description :
Product Code :
Date :
Drawing number :
P.J.Heath
CARDIN ELETTRONICA S.p.A
- 31020 San Vendemiano (TV) Italy - via Raffaello, 36 Tel: 0438/401818 Fax: 0438/401831
Draft :
All rights reserved. Unauthorised copying or use of the information contained in this document is punishable by law
A
MEMORIZZAZIONE CODICE TX-TX
TXQ504C4
29-10-2013
DM0912
Description :
Product Code :
Date :
Drawing number :
P.J.Heath
CARDIN ELETTRONICA S.p.A
- 31020 San Vendemiano (TV) Italy - via Raffaello, 36 Tel: 0438/401818 Fax: 0438/401831
Draft :
All rights reserved. Unauthorised copying or use of the information contained in this document is punishable by law
B
Summary of Contents for S504 Series
Page 99: ...99 Notes...