24
3. Memorising user codes locally
(using this procedure it is possible to add a new keypad / transponder reader user code).
Interface
- Move jumper
J1
on the interface to
position 1
then press
P1
twice and hold down for at least 2 seconds.
- Buzzer
B1
will
beep
and during the procedure led
L1
will flash slowly.
- The user code memorisation procedure will be activated with a time maximum of 30 seconds.
Keypad function
- Type the code to memorise into the keypad (max. 6 digits) and press confirm " ".
The keypad will sound a two-second long
beep
with the
green
led lit.
The code has been accepted.
-
Within 13 seconds of confirming the code press one or more functions A-B-C-D in sequence (e.g. A-C).
- Press " " and the interface will give confirmation by sounding a
beep
.
-
The code was accepted and the functions assigned.
Transponder reader function
- On the interface, move the dips of '
S1
' to '
ON
' depending on the channel function you wish to assign to the new transponder tag/card.
- It is only possible to assign 1 channel function to a transponder tag/card.
- Move the tag near to the remote transponder reader.
- The interface will give confirmation by sounding a 'beep' with the
green
led lit.
If you have inserted an invalid user code the interface will sound 5 consecutive beeps.
4. Memorising user codes remotely
(using this procedure (if you possess a master code) it is possible to add a new keypad /
transponder tag user without directly accessing the interface).
Keypad function
- Type the master code into the keypad and press " ".
The
remote user code memorisation
procedure will be activated with a time maximum of 30 seconds.
The keypad
beeps
and the
red
and
green
leds light up. The
green
led switches off and the function is active.
-
Type the new code to memorise into the keypad (max. 6 digits) and press confirm
" ".
- The keypad will sound a two-second long beep with the
green
led lit.
The code has been accepted.
- Within 13 seconds of confirming the code press one or more functions A-B-C-D in sequence (e.g. A-C).
- Press " "
and the interface will give confirmation by sounding a
beep
.
The code was accepted and the functions assigned
A
1 2 3
ON
4
B C D
CHANNEL
Attention!
Memorisation will only be possible
if jumper "
J2
" is in position
1
.
Summary of Contents for S504 Series
Page 99: ...99 Notes...
