45929, EN - rev. 6, 2019-03
76
Absolute measuring can also be performed on lower body.
1.
Select lower body measuring mode.
2.
Perform the same measuring method as on upper body.
NOTE:
Depending of the distance to be measured and the geometry of
the car body, you must select one of the following measuring adapters
when working in Absolute measuring mode:
M101-25, M106 or M107.
If any other adapter is used, the measured distance may be
incorrect.
For more extensive adapter information, see section 4.5.1 P2P Standard
measuring adapters.
NOTE:
The Absolute upper body measuring mode was added after the
Absolute lower body measuring mode. When opening an old work order
containing an Absolute lower body measuring, use the Upper
body/Lower body toggle button [1] to see your previous measurements.
