45929, EN - rev.6, 2019-03
63
4.5.1
Point-To-Point Standard measuring
adapters
NOTE:
Depending on the distance to be measured and the geometry of
the car body, you must select one of the following measuring adapters
when working in P2P mode:
M101-25, M106 or M107.
If any other adapter is used, the measured distance may be
incorrect.
Adapters M101-25
The M101-25 adapters are used when the measuring points are holes.
The tips must be placed level with the surface according to the picture
below, not pushed into the holes.
Figure 4.8 Measuring tube configuration for the M101-25 adapters.
