45929, EN - rev. 6, 2019-03
20
The PointX measuring arm is easy to operate. The basic principles for
operating the measuring arm is described below. For more extensive
information regarding how to perform measuring,
see section 4.4-4.5
Measuring methods.
1. Place the magnetic attachment (or measuring adapter) on a
symmetrical,
undamaged reference point
.
2. Pull out the telescopic measuring arm until the measuring adapter
is located on the point to be measured.
3. Hold the measuring head with your right hand.
4. Confirm the digital length measurement on the measuring head
display by pressing the target button,
see section 4.1.2
.
Figure 4.1 PointX measuring arm operation.
NOTE:
For correct result, hold the measuring arm with your right hand
only when using the magnetic attachment. Hold below reference point [5]
with your left hand when not using the magnetic attachment.
