45929, EN - rev.6, 2019-03
57
4.4.4
The Normal measuring method
Always consider vehicle safety features and design when selecting
measuring points, making sure that the points can be reached and
measured. You can create up to 6 measuring situations.
1. Select a reference point in the data sheet. When selected, the reference
point will be marked with a black circle
and a corresponding reference
point will automatically appear on the opposite side of the vehicle.
2. Appropriate measuring arm information is shown in the information box
and in the measuring arm display.
3. Select a measuring point in the data sheet. When selected, the measuring
point will be marked with a green circle
and a corresponding
measuring point will also appear.
4. Measure the first distance (blue line No.1) and press the “Target” button
to register the value
.
5. Continue to measure the remaining four distances in the sequence
indicated by numbers 2-5 on the screen. Register each distance by
pressing the "Target” button.
6. Compare measured values with DataSheet reference values.
