45929, EN - rev. 6, 2019-03
22
2. Start measuring by pressing the "Target button"
.
The measuring view below appears.
Here you will get information about:
a) Measured distance in mm.
b) Identification of current distance (1-5 in a measuring
situation).
c) Recommended measuring tube for reference point.
d) Recommended measuring tube for measuring point.
e) Recommended configuration of measuring arm.
To change measuring arm configuration, toggle with
button between all the possible configurations. For
example, you might need to extend the mesuring arm if the
point to be measured is out of reach for the recommended
configuration
To measure a distance, press
.
